Janome coverpro 900cpx vs 1000cpx: Comparison of Janome coverstitch machines

When you buy through links on seworbit.com, we may earn an affiliate commission. As an Amazon Associate Seworbit.com earns from qualifying purchases. The products' availability, prices, and discounts (subject to change) information displayed on the online store at the time of purchase will apply.

I'm going to guess that most of you already have a sewing machine and perhaps own a serger as well. 

Now you want to have a coverstitch machine for hemming and wants to know the difference between Janome CoverPro 900CPX and 1000 CPX coverstitch machines.

Right?

More...

In this review of the Janome Coverstitch machines, we’ll look at the differences between these two machines, and which Janome coverstitch machine is best for you.

In short, both these coverstitch machines are good. However, Janome 1000CPX edges out 900 model by the slightest of margin. 

What Are the Differences between the 900CPX and the 1000CPX Cover Stitch Machines?

You can see the differences, as well as many of the similarities, quite easily in the table below.

ModelCoverPro 900CPXCoverPro 1000CPX
Number of Needles1 or 21, 2, or 3
Extra Large Bed Space?YesYes
Differential Feed Ratio0.5 to 2.250.5 to 2.25
Stitch per MinuteUp to 1000Up to 1000
Stitch Quick Reference?YesYes
Free Arm?YesYes
Vertical Needle Drop?YesYes
Chain Stitch?YesYes
Seam Tightening System?YesYes
Cover Stitch?YesYes
Foot Pressure Adjustment?YesYes
Triple Cover Stitch?NoYes
Stitch Length (mm)1 to 41 to 4
Stitch Width (mm)56

A few of the items in the table deserve a little more explanation.

Threads and Needles: Janome coverpro 900cpx vs 1000cpx

The main difference is the number of threads and needles available on each machine.

The Janome CoverPro 1000CPX has three needles and four threads whereas the CoverPro 900CPX only has two needles and three threads. 

This is also the reason that the 1000CPX can do a triple cover stitch while the 900CPX cannot.

On the 1000CPX, the first three threads spools are for the needles, and the last one is for the lower looper hemming.

Whereas on the 900CPX, the first two threads are for the needles, and the last one is for the lower looper for hemming.

Seam Tightening System

Proprietary seam tightening system of Janome provides sturdy and crisp stitches by reducing slack in the looper thread. 

Quick Reference

On the front of both of these is a colorful sticker that is a handy display of possible settings for the thread dials.

Many users find this quick reference area to be a real help when starting a new project.

Differential Feed: Janome 1000CPX vs 900CPX

With the differential feed dial, you can change the settings of the feed dogs on both of these Janome CoverPro machines.  

You can adjust these settings from 0.5 to 2.25 on both machines.

Where you set the differential feed will depend on your type of fabric and whether or not you are trying to create a special effect, like a ruffle or a gather.

Stitch Width: Janome 900CPX vs Janome 1000CPX

The stitch width on the CoverPro 1000CPX differs a little depending on how many needles you are sewing with.

When using two needles, you can do a 3 millimeters narrow stitch or the standard 6mm width.

When using three needles, you get 6 millimeters.

Janome CoverPro 900CPX gives you 5 millimeters stitch width option. 

Soft Cover

With each machine, you should get a soft cover included in the package.

You may also get a larger amount of other accessories, depending on whether you purchase a special bundle with it or not.

Do you have to rethread everything when adding or removing needles?

The best thing is if you want to add a needle to both of these coverstitch machines, you insert the needle and thread it.

You don’t have to rethread all the needles on both of these coverstitch machines.

Similar is the case for removing the needle, just remove it and cut the specific thread and you are good to go.

How to easily remove the fabric from these machines?

Here's how you do it:

  1. Do the last stitch,
  2. Put the needle in the most upper position,
  3. Then raise the presser foot,
  4. Pull the thread forward with the help of seam ripper or tweezer and snip the thread, 
  5. Finally, pull the fabric from behind to get it off the machine.

It requires practice, but once you do it right, you don’t have to do any backstitching to secure the stitches which is an absolute time saver. 

How to take care of lack of measurement makings?

There’s no measurement marking alongside the needle plate on both of these machines.

You can paste the piece of tape and use it as a measurement guide while hemming.

Do these machines skip stitches?

Some users have complained about skip stitches on both of these machines.

Most of the time these complaints are due to incorrect settings of thread tension and feed dogs.

Coverstitch machines are all about testing different settings for different fabrics, so you need to check and go with settings that work best for you.

Conclusion: Which one should you pick?

Janome is a well-respected name in the sewing world. These two cover stitch machines are evidence of why this is so.

Both the 900CPX and the 1000CPX are nearly industrial quality machines that you should be delighted to own.

If you can afford the higher price of the 1000CPX, you will appreciate the extra ability that the three needles provide.

If you don't want both of these devices, here is our best covertstitch machines article.

Click Here to Leave a Comment Below

Leave a Comment: